1. What frequency
does the W110 series readers technology use?
The W110 series
readers technology operates at 13.56 MHz.
2. What ISO standards
does the W110 series readers technology comply with?
W110 series contactless
smart card readers are meeting ISO 14443 type - read only :
_MIFARER
serial number. The serial number it can read is the factory programmed
permanent _32
bit unique serial number. or
_Facility
code and Identification number ( for 26 bit wiegand format, Facility
code : 0~255,
_identification
number : 0 ~ 65.535 )programmed in card sector.
3. What is the
typical read range of the W110 series readers?
Typically, the read
range is 0 ~ 5 cm from the surface of reader to the selected smart card.
4. Can the W110
series readers provide a standard Wiegand output?
Yes. The reader's
Wiegand output easily interfaces with most existing Wiegand protocol
access control panels.
5. Is it possible
to program a 26 bits proximity format into the M8-01 contactless smart
card?
Yes. Wiegand data
(standard proximity formats : 26 bits proximity format) can be programmed
into the cards by Cox or by the customer using an card issuing system.
For more information of card issuing system, please contact Cox Control
Limited.
6. I am currently
using MIFARE cards, but like to use W110 series readers. Can it read data
from my current MIFARE cards?
Yes. The W110 series
readers can read the 32-bit unique serial number in Sector 0 from MIFARE
cards. (The serial number is the factory programmed permanent unique
ID number).
7. What kind of
keypad format is available for W110 series readers?
W110 series readers
(W110-01KX and W110-01FX) is supporting different kind of keypad format.
Please refer to Keypad Format document . If your access control system
is using special keypad format, Cox will try to match it, please contact
Cox Control.
8. How to synchronize
the time display in W110-01DX and W110-01FX readers?
Very easy. You can
try to cross the Green LED (green color cable) and Red LED (brown color
cable) to GND. The second row of display will change from "WELCOME"
to Time 00:00:00.
We design the timer
for the controller which has two extra relays. The operator should start
the relays at 12:00:00 (mid-night) and change the timer to 00:00:00.
9. What kind of
information can be show in the display of W110-01DX and W110-01FX readers?
The display of W110-01DX
and W110-01FX readers is able to show organization name in the first
row and either time, cardholder name, card serial number or programmed
ID number. sample as below.
10.
What is the operating voltage of W110 series readers?
The operating Voltage
range (DC) is 10V DC ~ 15 V DC
Typical current at 12V DC is 80mA (for W110-01MX and W110-01KX readers)
and 110mA (for W110-01DX and W110-01FX readers)
If the following answers
still cannot answer your question, please don't hesitate to contact us
now, we shall feedback you as soon as possible.